Connecting Yealink phones to Wi-Fi
To start using the Yealink on Wi-Fi, follow the steps below to proceed:
1. Disconnect the Ethernet cable to enable Wi-Fi connectivity
2. You will be prompted to scan and connect to available Wi-Fi networks. Alternatively, you can do this manually by going to Menu > Settings > Basic Settings > Wi-Fi
3. Select Available Networks, and press OK
4. Select the desired Wi-Fi network, and press Connect
5. Enter the password, and press OK
Allow a few seconds for the phone to connect to your Wi-Fi connection. If factory resetting, the phone may reboot again to apply additional configurations.