Setup Call Parking with BLF (Busy Lamp Field)

Call Parking allows calls to be picked up from any device. Using BLF, each button will show as green when not active and red when a call is parked. Press the red button to pick up that call.

 

1. To setup Call Parking, please login to the device you would like to configure

1. 1. Press the OK button on your Yealink device. Note the IPv4 address.
   2. Type that address (i.g. 192.168.1.15) into your browsers.
   3. Enter admin as the username and blitz as the default password.

2. Navigate to Dsskey

• Ext Key for Yealink EXP20

3. Program the keys based on the image below

• Select Call Park and Value: 700 to automatically transfer calls to park
• Select BLF and Value: 701-720 to assign the buttons to parked calls

Auto Provision codes are:

linekey.2.label = Park
linekey.2.line = 1
linekey.2.type = 10
linekey.2.value = 700

linekey.3.label = Park 1
linekey.3.type = 16
linekey.3.value = 701

linekey.4.label = Park 2
linekey.4.type = 16
linekey.4.value = 702

linekey.5.label = Park 3
linekey.5.type = 16
linekey.5.value = 703

expansion_module.1.key.1.type =
expansion_module.1.key.1.line =
expansion_module.1.key.1.value =
expansion_module.1.key.1.label =